A glowing yellow-hot forged billet held between two heavy press columns, dark shop background lit by the heat.

An STS Metals Company

Forged Products

Leading supplier of open-die forgings for the oil & gas industry.

Houston, Texas

1963
Founded, forging in Houston for six decades
6,500-ton
Open-die forging press, largest in the STS Metals group
60,000
Max forging weight, in pounds
ISO 9001
2015 certified through Lloyd's Register
Aerial view of the Forged Products Houston plant, a long row of industrial buildings with forgings stacked in the yard.
Forged Products logo

Forging a difference since 1963

Forged Products, Inc. has served the oil & gas industry from Houston, Texas since 1963, and today is ISO 9001:2015 certified through Lloyd's Register. The company works in carbon, low-alloy, and stainless steel as well as titanium and nickel alloys, forged through open-die, closed-die, extrusion, and mandrel methods depending on what a part actually calls for.

The Houston plant runs a 6,500-ton and a 3,000-ton digitally controlled hydraulic forging press alongside a Dango & Dienenthal manipulator, car-bottom heat-treat furnaces with a 44,000-gallon water quench tank, and in-house rough and finish machining, so a forging never has to leave the building to reach its final dimensions.

Inside STS Metals, Forged Products is the group's heavy-forging specialist, built for parts none of the titanium companies are set up to make: subsea housings, riser connectors and flanges, BOP bodies and rams, and wind turbine shafts, forged up to 60,000 lbs and machined up to 120 inches in diameter.

In-house, under one roof

From forge to finished part

Open-die, closed-die, extrusion, and mandrel forging in carbon, alloy, stainless, titanium, and nickel grades, with heat treating, machining, and testing all on site in Houston.

A blue FPI forging manipulator vehicle holding a glowing orange-hot forged disc under the 6,500-ton press's heavy black columns.

6,500 and 3,000-ton hydraulic presses

Two digitally controlled open-die presses forge parts up to 60,000 lbs, with parting up to 80" round or square.

Dango & Dienenthal manipulator

A dedicated forging manipulator positions and rotates heated workpieces through the press for controlled, repeatable open-die work.

Car-bottom heat-treat furnaces

Furnaces paired with a 44,000-gallon water quench tank handle annealing, quenching, tempering, stress relieving, and solution treating and aging in house.

In-house rough and finish machining

Grinding, boring, milling, and turning finish forgings up to 120" in diameter and 12' in length without leaving the plant.

Non-destructive testing

In-house NDE (non-destructive examination, checking for internal flaws without cutting the part open) confirms quality before shipment.

Sandblasting and finishing

In-house blast cleaning brings forgings to final surface condition.

From the 2026 line card

Materials & products

Steel

CarbonAlloyStainless

Titanium

Nickel

A large machined forged component with twin bores and a wide mounting flange.
Product formsOpen-die forgingsClosed-die forgingsExtrusion forgingsMandrel forgings

Forging weight: 40 lbs to 60,000 lbs (30 tons max)

Parting: up to 80" round or square (2,032mm)

Machining: up to 120" diameter (3,048mm) and 12' length (3.66m)

A large stainless furnace car on rails inside the Forged Products shop.

Leading supplier of open-die forgings for the oil & gas industry.

Quality & approvals

ISO 9001:2015 (Lloyd's Register)Pressure Equipment Directive (PED) compliantForging Industry Association member

Industries served

Oil & GasPower GenerationChemicalPetrochemicalHeavy EquipmentMiningIndustrial

Visit us

Houston, Texas

Current standalone site

The rest of the family

Sierra Alloys→TSI Titanium→Sierra Sheet & Plate→Brown Pacific→Brown Europe→← All companies

Built on trust, delivered with integrity

Contact Us Today

Ask us about any of our facilities and how we can best help with manufacturing what you need by reaching out to us directly.

Contact Now